Skip to content
Menu
905-388-3333

Monday – Friday: 8:00AM – 4:30PM · 24 Hour Emergency Service

A parent hugging a smiling baby in a warm home

Heating

Furnace Repair in Hamilton and Niagara

Fixing Broken Furnaces Since 1955

On this page
  1. Signs your furnace needs repair
  2. The most common causes of furnace failure
  3. 24/7 emergency furnace repair
  4. Furnace repair questions

Cold rooms? Banging or groaning from the basement in the middle of the night? Most furnace problems can be solved quickly by an experienced technician. Lancaster Heating and Cooling repairs all makes and models of gas furnaces across Hamilton and Niagara, 24 hours a day.

Our licensed, factory-trained technicians have fast access to repair parts from all manufacturers, so your heat is back on without unnecessary downtime.

Book a Furnace Repair

A Lancaster technician repairing a furnace in a Hamilton home

Signs your furnace needs repair

Strange smells

A dusty smell the first time you turn on the heat is normal and fades quickly. A smell that appears suddenly or won’t go away needs a professional.

Odd noises

Banging, rattling or squealing can come from many parts and is best diagnosed by a technician.

Short cycling

A furnace that turns on and off constantly has something stopping it from running properly.

Start-up problems

The furnace doesn’t come on when it should, or clicks without lighting.

Rising energy bills

A sudden jump in gas use often means the furnace is being pushed past its limits.

Rust

Excessive rust, especially on the flue, can signal a venting or leak problem, and if it reaches the heat exchanger, a carbon monoxide risk.

Frequent service calls

Every furnace needs a repair now and then, but multiple calls in one season usually mean it’s nearing the end of its life. See furnace replacement.

The most common causes of furnace failure

Clogged filter

Restricts airflow and makes the furnace overheat and shut down. Check it monthly in winter, especially with pets.

Thermostat problems

Dead batteries or the wrong setting. Make sure it’s set to Heat, with the fan on Auto.

Ignition failure

A worn igniter or dirty flame sensor stops the burners from lighting. Regular cleaning prevents most of these failures.

Inducer (exhaust) motor problems

This fan vents combustion gases safely outside. When it fails, the furnace cycles or shuts down.

Blower motor failure

The furnace heats, but warm air doesn’t reach your rooms. Overheating and debris are common causes.

Cracked heat exchanger

A serious safety issue. Replacing the heat exchanger can be expensive, so many homeowners choose a new furnace. If the furnace is oversized and short-cycling, a new heat exchanger alone will fail again.

Try our furnace troubleshooting checklist for safe checks before you call.

24/7 emergency furnace repair

When it’s freezing outside, you need heat now. We offer 24/7 emergency repair across Hamilton and Niagara. Call 905-388-3333.

Smell gas? Leave your home immediately, then call 911 from outside.

After the repair, an annual furnace tune-up or a service plan helps prevent the next breakdown.

What to expect

How our furnace repair works

  1. Call or book online

    Call 905-388-3333, day or night, or request service online. We're available 24/7 for emergencies.

  2. Diagnosis by our own technician

    A licensed, factory-trained Lancaster employee (never a subcontractor) finds the root cause, on all makes and models.

  3. Upfront, flat-rate pricing

    We explain what failed and your options, with the price before any work starts, so you can decide with confidence.

  4. Repair, test and safety check

    Our fully stocked vehicles carry parts for most repairs. We fix it, then test operation and safety before we leave.

  5. Prevent the next breakdown

    Ask about a service plan with spring and fall inspections to catch problems early.

Time to replace?

Compare all furnaces
  • Trane Premier 96 M – 96 Modulating Variable Speed Gas Furnace Premium
    Trane

    Furnace

    Trane Premier 96M Modulating Gas Furnace

    Model TUHMB060 / TUHMB080 +6

    AFUE rating of up to 97.3%. Fully modulating gas heat with variable-speed blower for consistent, precise warmth. Formerly the Trane XC95m.

    AFUE
    97.3%
    Stages
    Modulating
    Blower
    Variable
    View details
  • Goodman GRVM97 Modulating Gas Furnace Premium
    Goodman

    Furnace

    Goodman GRVM97 Modulating Gas Furnace

    Model GRVM97 / GDVM97

    Self-calibrating modulating gas valve. Integrated communicating ComfortBridge™ Technology.

    AFUE
    97%
    Stages
    Modulating
    Blower
    Variable
    View details
  • Trane Premier 97 – 97 Two-Stage Variable Speed Gas Furnace Premium
    Trane

    Furnace

    Trane Premier 97 Two-Stage Variable-Speed Gas Furnace

    Model S9V2B040D3VSB* / S9V2B040U3VSB* +9

    97% AFUE. Two-stage gas valve runs on 'low' as often as possible for quieter, more even heat. Formerly the Trane S9V2-VS.

    AFUE
    97%
    Stages
    Two-stage
    Blower
    Variable
    View details

Our work

See all projects
  • Residential

    Hamilton Furnace Repair

    Furnace repair in Hamilton

    A Carrier furnace in a Hamilton basement after repair, with its sheet metal plenum and PVC venting.

    See our work

Helpful guides

Furnace repair questions

What can I do before calling someone to service my system?

A few safe checks can fix common problems before you book a repair. Make sure the thermostat is set to Heat and has fresh batteries, the furnace switch and circuit breaker are on, the filter is clean, and supply and return vents are open and unblocked. On a high-efficiency furnace, check that snow isn't blocking the outdoor intake and exhaust pipes. If that doesn't help, try our troubleshooting checklist or contact us.

Why is my furnace running but the house won't warm up?

When the furnace runs but rooms stay cold, the usual causes are a clogged filter, a thermostat fan set to On instead of Auto, an ignition or flame-sensor fault, or a weak blower that can't move enough warm air. Closed vents, leaky ductwork or an undersized furnace can also leave distant rooms cold. Check the filter and thermostat first. If the air from the vents is still cool or weak, book a repair so a technician can find the cause.

Why does my furnace keep shutting off?

A furnace that turns on and off every few minutes, called short cycling, is usually protecting itself from a problem. Common causes are a clogged filter that makes it overheat, a dirty flame sensor, a blocked vent or condensate drain, a faulty limit switch, or a furnace that's too big for the home. Short cycling wastes gas and wears out parts, and resetting it over and over can hide a safety issue, so have a technician diagnose it.

Is it safe to run a furnace that smells like gas?

No. If you smell gas (a rotten-egg or sulphur odour), don't run the furnace or touch light switches, thermostats or appliances. Leave your home right away, then call Enbridge Gas's emergency line at 1-866-763-5427 or 911 from outside, or your propane supplier if you heat with propane. Don't go back in until they say it's safe. Once the leak is found and the gas shut off, a licensed technician can repair the furnace or gas line.

What should I do if my carbon monoxide alarm goes off?

Get everyone, including pets, outside into fresh air right away and call 911. Carbon monoxide is colourless and odourless, so don't wait for symptoms like headache, nausea or dizziness. Stay out until emergency responders say it's safe. Before using your furnace or other fuel-burning appliances again, have them inspected by a licensed technician; a cracked heat exchanger or blocked vent is a common culprit. For urgent help, see emergency HVAC repair.

How is a furnace repair priced?

Furnace repairs are priced on diagnostic time plus any parts needed, so the total depends on what's wrong. Our regular diagnostic fee is $140 an hour plus HST, and extra charges apply after regular business hours, on weekends and on holidays. Gold and Silver service plan members pay a discounted $120 an hour and save on parts not covered by warranty. Your technician will explain the repair cost before any work starts.

Should I repair or replace my furnace?

Repair usually makes sense if the furnace is under about 15 years old and the problem is a single, reasonably priced part. Consider replacing it if it's over 15 years old, has needed several repairs this season, has a cracked heat exchanger, or the repair would cost more than half the price of a new furnace. A new high-efficiency furnace will also lower your gas bills. See furnace replacement or request a free quote.

Why is my furnace making loud noises?

Different noises point to different problems. A bang when the burners light often means delayed ignition from dirty burners, which should be checked soon. Squealing usually comes from the blower motor, rattling from a loose panel or a failing inducer motor, and buzzing or humming from an electrical part. Popping in the ducts is often just metal expanding and contracting. If a loud new noise starts suddenly, turn the furnace off and book a repair.

Why won't my furnace turn on?

First check the thermostat setting and batteries, the furnace power switch, the circuit breaker and the blower door, because most furnaces won't run unless the door panel is fully closed. If the furnace clicks or tries to start without lighting, the igniter, flame sensor, pressure switch or gas valve may have failed. A furnace that has locked itself out after several attempts needs a technician, so avoid resetting it repeatedly.

Why is there water around my furnace?

Water around a high-efficiency furnace usually comes from its condensate system: a clogged drain line, a cracked trap or hose, or a failed condensate pump. These furnaces produce water as they cool the exhaust, and it has to drain away properly. In summer, the leak may come from the air conditioner coil above the furnace instead. Turn the furnace off if water reaches electrical parts, and book a repair, since a blocked drain can also make the furnace shut down.

Is a yellow flame in my furnace dangerous?

It can be. A healthy gas burner flame is mostly blue. A yellow, orange or flickering flame usually means incomplete combustion from dirty burners, poor air supply or a venting problem, and that can produce carbon monoxide. Make sure your CO alarms are working and book a furnace inspection soon. If a CO alarm sounds or anyone feels unwell, leave the home and call 911. A yearly furnace tune-up helps prevent this.

Ask Us a Question

What Our Clients Say About Our Furnace Repair Service

Jason and Richard are fantastic to work with. They helped fix my furnace and handled warranty on parts diligently. Thank you.

Raj K. Google review · November 2024

In the very cold week of January our Gas furnace failed. We contacted Lancaster and they sent us Dave. He was able to resolve the issue quickly and had us warm and cozy in a short period of time. Great staff, great service! Thank you.

Harley Rider Google review · February 2026

Excellent service! Our furnace was working intermittently, and the technician arrived within hours. He was friendly and professional and fixed the problem. The cost was also very reasonable.

Lily Ernst Google review · January 2026
Call now Book service