Skip to content
Menu
905-388-3333

Monday – Friday: 8:00AM – 4:30PM · 24 Hour Emergency Service

Hot water running from a shower head

Water Heaters

Water Heater Maintenance Service in Hamilton and Niagara

Maintaining Water Heaters Since 1955

On this page
  1. What’s included
  2. Why it’s worth it
  3. Water heater maintenance questions

Yearly maintenance keeps your water heater efficient, prevents breakdowns and helps it last longer. Lancaster Heating and Cooling’s certified technicians service storage and tankless water heaters of all makes across Hamilton and Niagara.

Book Water Heater Maintenance

What’s included

Complete inspection

We check for rust, corrosion, leaks and any developing issues, plus venting and gas or electrical connections.

Sediment flush (tank models)

Minerals settle at the bottom of the tank, lowering efficiency and causing noise and corrosion. Flushing removes them.

Descaling (tankless models)

Scale build-up can damage the heat exchanger, so we flush the system to keep it running efficiently.

Anode rod check (tank models)

The anode rod slowly dissolves to protect the tank from rust. We check it and recommend replacement when it’s worn.

Safety check

We test the temperature and pressure relief valve and the controls.

Why it’s worth it

Longer life

Tankless water heaters can last up to 20 years with proper maintenance, and tanks last longer when sediment is flushed regularly.

Better efficiency

A heater free of mineral build-up heats faster and costs less to run.

Fewer repairs

We catch small problems before they become leaks or failures.

Warranty protection

Many manufacturers, especially of tankless models, require professional maintenance to keep the warranty valid.

Noticing temperature swings, noises or discoloured water already? See water heater repair.

What to expect

What's included in water heater maintenance

  1. Book before the season

    Schedule in spring for cooling and in fall for heating, or let a service plan remind you.

  2. 21-point inspection

    A licensed technician inspects the equipment, controls and safety devices from top to bottom.

  3. Clean, adjust and test

    We clean key components, adjust for efficiency and complete a safety and carbon monoxide check.

  4. Clear report

    You get honest findings and recommendations, with no pressure.

  5. Stay protected

    Regular maintenance lowers energy use, prevents breakdowns and helps keep your warranty valid.

Helpful guides

Water heater maintenance questions

Do tankless water heaters require service?

Yes. Most tankless water heaters need yearly maintenance, mainly descaling: circulating a cleaning solution through the heat exchanger to dissolve mineral build-up, unless your model has built-in scale prevention. A technician also cleans the inlet water filter, checks the venting and condensate drain, and confirms the unit is firing properly. Descaling needs isolation valves and the right equipment, so it's best left to a trained technician to avoid damaging the unit.

What is the lifespan of a conventional water heater?

A conventional tank water heater typically lasts about 8 to 12 years. Regular maintenance, such as flushing sediment and replacing a worn anode rod, helps it reach the upper end of that range or beyond, while a neglected tank in hard water may fail sooner. Tankless units generally last longer with yearly descaling. Once a tank is past 10 years old, it's wise to start planning a replacement.

How often should my water heater be serviced?

Once a year is a good rule for both tank and tankless water heaters. A yearly visit covers flushing or descaling, a relief valve test, an anode rod check on tanks, and an inspection of the venting, gas controls and connections. Homes with harder water or heavy hot water use may benefit from more frequent tank flushing. Always follow your manufacturer's recommendations, since some set their own maintenance schedule for warranty coverage.

Can I flush my tank water heater myself?

You can, if you're comfortable with it. Turn off the gas or power, close the cold water supply, connect a hose to the drain valve and run it to a floor drain, then open a hot tap to let air in. Be careful: the water is hot enough to scald. Older plastic drain valves can clog with sediment or leak after opening, and heavy build-up may not flush out. If that happens, or you'd rather not, book a professional flush.

What is an anode rod, and when should it be replaced?

An anode rod is a metal rod inside a tank water heater that corrodes on purpose, so the steel tank doesn't. Once it's mostly used up, the tank itself starts to rust. Have it checked every few years, or more often if you have a water softener, which wears anodes faster. Replace it when much of the rod is gone or its steel core wire is showing. A fresh anode is a simple way to help extend a tank's life.

How does Hamilton's hard water affect my water heater?

Hamilton's water is moderately hard, about 120 mg/L according to the city, so minerals build up inside water heaters over time. In a tank, they settle as sediment that causes rumbling, wastes energy and shortens the tank's life. In a tankless unit, they form scale on the heat exchanger, which can cause overheating, error codes and reduced flow. Yearly flushing or descaling keeps this in check. A water softener reduces scale, though it wears anode rods faster.

How do I test my water heater's temperature and pressure relief valve?

Place a bucket under the discharge pipe, lift the valve's test lever for a few seconds, then let it snap back. Hot water should rush out and stop when you release it. Stand clear, because the water can scald. If nothing comes out, or the valve keeps dripping afterward, it needs to be replaced. Many manufacturers suggest testing it once a year, and our yearly water heater maintenance includes this test.

Does skipping maintenance affect my water heater warranty?

It can. Many manufacturers, especially of tankless models, require regular professional maintenance to keep the warranty valid, and a heat exchanger damaged by scale may not be covered if descaling was skipped. Warranty terms differ by brand and model, so check your documents. Keep receipts or service records from each visit, since you may need them if you ever make a claim.

Can my water heater be added to a Lancaster service plan?

Ask us. Our service plans are built around a spring air conditioner inspection and a fall furnace inspection, and additional equipment can be added at a price set per plan. We'll tell you whether your water heater can be included. If you'd rather not join a plan, you can book a one-time water heater maintenance visit through our quote form.

What can I check on my water heater between service visits?

A quick look every month or so can catch problems early. Check the floor around the heater for moisture or rust, keep the area clear of storage and anything flammable, and listen for new noises. On power-vent and tankless units, keep the outdoor intake and exhaust vents clear of snow, leaves and nests. Note any change in water colour, smell or temperature. If you spot something, see water heater repair.

Ask Us a Question

What Our Clients Say About Our Water Heater Maintenance Service

We purchased a furnace and tankless hot water heater from Lancaster almost 2 years ago. We wanted the tankless water heater cleaned and descaled to keep it running at the optimal level. Lancaster sent Rob over to complete the work. Rob was on time, very friendly, professional, and easy to chat with. He went above and beyond and left the worksite clean. Would highly recommend Rob!.

Jeff Timmons Google review · Oct 2023
Call now Book service